Celestron telescope cassegrain C90 C5 8x20 5x24 aluminum finder brackets USA For Sale
This item has been shown 81 times.
Celestron telescope cassegrain C90 C5 8x20 5x24 aluminum finder brackets USA:
This sale is for a complete 1983 Celestron (USA)C90 gray cast aluminum 5x24 and/or 8x20 finder scope mounting brackets. They come complete with their (3) nylon plastic set screws.
The set screws this model comes with WILL NOT harm the paint of your finder scope.
This bracket will hold ANY finder scope in the 20mm to 24mm aperture size; this includes both the orange and black Celestron (Vixen and Carton Optical of Japan) 5x24 finders and the 8x20 black finders (Taiwan, Korea, and China). For steady results, a small, rubber o-ring is usually needed to keep alignment spot on during transportation. You can also use electrical tape or a rubber band on the end of your finder-in-use; a safe option which will not harm the paint on the finder.
These gray-colored aluminum brackets were stock on ALL orange C90s and on the 1st and 2nd generation orange C5. This bracket WILL IMMEDIATELY FIT to all C90s from 1978-the last years of the Rubberized C90 of the very late 1990s, all orange C5 models, the black-and-white C5+ optical tubes of the mid-to-late 1990s, and it will fit to the Meade 90mm maksutovs that ARE NOT the ETX line; the 97-series. It will NOT FIT on the Chinese C90 models.
Bolt pattern is 1.08-inch separation.
Inside diameter of the rings are 1.10-inches. If using a non-Celestron brand 5x to 8x finder, make sure its tube diameter WILL BE SMALLER than this measurement.
Packed with great care.
Combined shipping offered.