PLA _ ZWO SeeStar S50 Telescope Dew 5\" Cap Bahtinov Spike 1.25\" 2\" Filter Holder For Sale
![PLA _ ZWO SeeStar S50 Telescope Dew 5\](telescope-image-large/g/0VQAAOSw7Vlm~NGI/s-l1600/PLA-ZWO-SeeStar-S50-Telescope-Dew-5-Cap-Bahtinov-S.jpg "PLA _ ZWO SeeStar S50 Telescope Dew 5\")
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
PLA _ ZWO SeeStar S50 Telescope Dew 5\" Cap Bahtinov Spike 1.25\" 2\" Filter Holder:
$23.21
The Item for sale:Color: Matte Black
QTY (1): Top/bottom pieces housing Slot Filter Holders for 2\" Deep Sky Filters (M48x.75)
QTY (1): Spacer with hole and thread for 1.25-inch Filter (M28.5x.75).
QTY (1): Light Block (Dew) about 5 inches (~127mm) in length
QTY (1): Batinov Mask
QTY (1): Spike Diffraction 4 veins
QTY (1): Spike Diffraction 6 veins
QTY (1): Len Cap Cover (TPU Flexible)
I also included a few M3 screws in case you needed them.If needed you can thread in a normal head M3 screw to the small hole on the 3DPrint part, which will bulge on the other side of the wall for tighter fitment. Do it slowly with some force applied for the M3 screw for it to thread-cut into the 3d print plastic. Over-tighten/force the screw will punch through the thin 3D print wall (~1mm thick). Then, remove the normal M3 screw and insert a headless M3 screw in place.For the deep sky filter please counter Clockwise for the thread to line up, then thread in Clockwise, and not to over-tighten.All item is 3D Printed in ELEGOO Matte PLA
(Due to the nature of 3D print filament it will still shine/gloss after 3D printing the parts in Matte PLA. But it is way less compared to none Matte PLA)SeeStar S50Telescope, Len Filter, Case, and Stand not included.Item will ship in 1 to 2 business days.Disclaimer:***NOTE***
Effected 10/1/2024 the Dew will be 5 inches long, with a TPU cap cover, and a small hole on a 3D_Printed part Filter holder for fitment adjustment.
Due to the 3D print nature of this product, your results may vary. Sorry, there are no returns or exchanges. I am NOT responsible for any damages to your EAA telescope due to the result of the use of this product.
This is the Original Screw_Threaded Design Slot Filter holder that enables Dew Attachment. So please beware of other copycat sellers.
***NOTE***
