LOADED Celestron CGEMDX Mount 9.25SCT Telescope F2.3 HyperStar Cameras Filters+ For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
LOADED Celestron CGEMDX Mount 9.25SCT Telescope F2.3 HyperStar Cameras Filters+:
$9795.00
Fully Automated Astrophotography with Windows10 PC Mounted and Remote Wireless Control
I will consider dividing/parting into smaller lots, so please examine everything and advise details if interested in a partial lot.However, Icannot part-out or sell small individual itemssuch as cameras, filters, StarSense, HyperStar, Hotech Alignment, etc.If you are experienced with advanced astrophotography, then I understand you're not likely seeking a turnkey system.
- You're welcome to come visit in person near Austin, TX to "test drive" the astrophotography setup.
- The system is fully functioning and all drivers and firmware are up-to-date as of Jan 2024.
- I have original purchase receipts for nearly every piece of equipment and accessory.
- This setup is amazing: last photo is SH2-124, NB filters (Ha,Si,O3) with HyperStar, only 15ea 60s frames! HyperStar coupled with precision guiding cuts exposure time by at least 80%.
Please message me with any questions or comments :)
The setup explained:1. PrimaLuceLab Eagle 3 Control System (MS WINDOWS 10 PC) is mounted directly to the optical tube and all astro equipment is connected here, so only a single cord (power) is external. Can be powered by 120V or 12V.
2. Telescope Control Software is also installed on the Windows 10 Eagle 3 computer. You can install whatever software you're accustomed to including: image capture, autoguiding, PHD2, autofocus, filter rotator, PoleMaster, dew heaters, etc.
3. Remote Connect to the Eagle Control system/computer with your laptop or tablet and control everything wirelessly and/or remotely.
The AP system is fully functioning and all drivers and firmware are up-to-date as of Jan 2024.I have purchase receipts for nearly every piece of equipment.
Equipment List:
- Celestron 9.25 SCT Optical Tube
- Celestron CGEM DX heavy duty mount (sturdier and heavier than CGEM II)
- PrimaLuceLab Eagle 3 Telescope Control, mounted to OT (Eagle LE + all cables)
- PrimaLuceLab Dew Heaters x2: one for 9.25 SCT, one for HyperStar
- HyperStar9.25 from Starizona
- HyperStarFilter slider Adaptor
- HyperStarFilter Slider x4
- Pegasus Astro Motor Focus + Dual Motor Focus Control
- Hotech 9.25" HyperStar Laser Collimator
- QHY10 Pro Color Camera 10MP, 36mm diagonal Sony sensor
- ZWO ASI 183 Pro Mono Camera, 20MP
- ZWO ASI 1600 Pro Mono Camera, 20MP
- StarSense Auto Alignment System by Celestron
- StarSense Hand Control + extra CGEM DX Hand Control
- QHY PoleMaster Polar Alignment System, dead-on polar alignment in minutes
- Orion 80mm Guide Scope with OT mount
- Celestron SkyPortal Wi-Fi Adaptor (not needed when using Eagle 3 Control System, but useful for simple setups, like observing or planetary imaging)
- Optolong Ha, S2, O3 12nm Narrowband Filter Set - SPECIFICALLY designed for HyperStar F2.3
- Solid Aluminum Dew Shield with Face Cover
- Dozens of peripheral cables, all labeled
- Large inventory of reducers, thread converters, Barlow lenses, Angle adapters, etc.
- 1.25" 8-24mm zoom eyepiece
- 1.25" eyepiece and star diagonal
- 2" SCT adaptor and 2" T Thread Adaptor
- Hard Storage Cases for Cameras and Filters
- Large padded storage to house OT without having to disassemble any accessories
- Telescope Reflective Heat and Dust Cover
- VERY Detailed Operating Manuals for all equipment
SHIPPING: Shipping cost is only an estimate!! Local pickup is free and preferable, white-glove shipping by private carrier (uship) can be arranged.